Login  Sign up

New Quality Setting on cam4


there is a new Quality Setting available on some Cams. You can choos the Quality (360P, 600P ...) and that add´s a new Parameter to the rtmp url


But then i change the Quality setting on the Flash Player JMR is not changing to the new Stream and records only the 360p Stream.
Is there e way to choos it also in JMR?

Here are 2 Logs. In the second Log the Camera changes also the Aspect Ratio (4:3 to 16:9) but JMR detects also no new stream.

One Question when you change the Quality refreshes your Flash Player the Stream?

I mean the Picture goes away and comes back?


Here is another screen rec where you can see that the cam is in 16:9 but JMR record 4:3 Stream

(1.77 MB)

Is there anything new?

One Question. If i had the stream Adress E.g. (rtmp://srcm071.cam4.com/cam4-edge-live<break>beyond94-243-efee9f49-a91d-4d24-a0c9-cac688d49aef_360p?playToken=null).

Is there a Way to change the link and start the download manually in rtmp? E.g.


JMR in auto mode, in the case of cam4, just detects what your browser request, grabs that and captures it (its a bit more complicated than that is the gist of it).  

When changing quality at cam4 a new request with a different url is made by your browser for the new quality.  This results in a second stream being detected and captured.

See in this image the original default 360p capture, followed by the 600p capture that was detected when I switched from auto to 600p in the cam4 player.


Hmm okay... But that doesn't work by me...

If i change from Auto to 600P the Flash Player changes the Quality (I see it the Picture gets better) but JMR detects no new stream

JMR is in Auto mode.

PS: In your ScreenShot the Auto Mode is off ;P

Here is a Screen Record here you can see that it won't work

(2.07 MB)

Sure I switched Auto off after it was detected that is all.  Works fine here as demonstrated so provide your debug logs so I can see why its not working on your machine.

Login or Signup to post a comment